Christmas Box Information & SVG Files

To use SVG files: open the link, right click and save file - leave in svg file format. Upload to the software for your machine, and you will see the designs separated into layers. Remove unwanted layers, and weld or attach where necessary. 

Please note that these files were designed for personal use by That Craft Pack subscribers. They are not for resale or commercial use. While I think sharing is the best route for most things (especially when it comes to chocolate), please resist the urge to share these files with friends.

Santa Tray SVG

Ornament Background Shapes

Christmas 1

Christmas 2

Christmas 3

Gift Tag Shapes 

 

Box Material Descriptions!

It is recommended to try a small test cut on each material to ensure the correct cut settings for your machine. For heat transfer vinyl, pre-wash material to minimize shrinking. Wait 24 hours after application before washing.

Teckwrap Craft Metallic Red Adhesive Vinyl 

Retail Cost $2.75

Remove clear top layer from vinyl before cutting. Recommended cut setting: Vinyl

Teckwrap Craft Champagne Gold Glitter Adhesive Vinyl 

Retail Cost $2.75

Recommended cut setting: Frosted Glitter

Oracal 651 White Adhesive Vinyl

Retail Cost $2.00

Recommended cut setting: Vinyl

Starcraft Chrome Silver Adhesive Vinyl

Retail Cost $2.50

Recommended cut setting: Vinyl

Starcraft Forest Green Adhesive Vinyl

Retail Cost $2.50

Recommended cut setting: Vinyl

Teckwrap Opal Holographic Permanent Vinyl

Retail Cost $2.75

Recommended cut setting: Vinyl

 

Siser Silver Heat Transfer Vinyl

Retail Cost $3.25

Recommended cut setting: Everyday Iron-On. Mirror design, place face down on mat for cutting. Preheat material for 2-3 sec. Medium Pressure for 10-15 Sec. at 305 ° F,  warm or cool peel.

 

Starcraft Red Heat Transfer Vinyl Vinyl

Retail Cost $3.00

Recommended cut setting: Everyday Iron-On

Mirror design, place face down on mat for cutting. 285°F 8-10 Sec., medium to firm pressure, warm peel.

 

Starcraft White Puff 3D Heat Transfer Vinyl

Retail Cost $3.60

Recommended cut setting: Everyday Iron-On - Place shinier side up and mirror design. Delicate weed. Wait 24 hours to wash.

285°F 10-12 Sec., medium to firm pressure, Warm peel. To maximize the 3D effect, remove protective (carrier, Parchment or non-stick sheet) and press a second time directly against the heat platen. 285°F, 5-7 sec, medium to firm pressure

 

Siser Glitter Grass Heat Transfer Vinyl

Retail Cost $3.90

Recommended cut setting: Glitter Iron-On.

Mirror design, place face down on mat for cutting. Apply with heat at 320° F, medium pressure for 15 sec. warm or cold peel.

Set of 6 Ornament Blanks

Retail Cost $10 

Remove plastic protective layers on both sides of the Acrylic ornaments prior to adding design.
SVG File Sets

 Retail Cost $15